Cleaning the glass door or walls of your shower can be a real challenge! But it has to be done to maintain its appearance, prevent damage like permanent marks and stains, and prevent mould growth. Follow these steps for a sparkling shower and a sanitary environment.
Why bother with stubborn lime stains?
Stubborn lime stains often appear when hard water deposits accumulate due to a high mineral concentration in the water. When water evaporates, it leaves behind stains that mix with other substances (like shampoo or soap) and become hard to get rid of.
You’ll find this type of stain throughout the house on water glasses and in the kettle, but they are at their worst in the bathroom—around taps and on the shower head, tiles and glass.
These deposits are not only unsightly, but they can also obstruct taps and reduce water flow. Hard water evenmakes cleaning products less effective, leaving behind a soapy residue. Ultimately, if enough deposits build up, you may need to replace certain shower components. So it’s important to take action to eliminate them.
How to prevent mould
Humidity is conducive to mould growing; that’s why cleaning the shower can be such an off-putting job. It’s important to air out the bathroom as often as possible by opening a window and running the extractor fan. In an ideal world, you should wipe down the shower walls to remove excess water after every use.
6 effective cleaning products
If lime stains and mould persist despite your best efforts, it’s time to get serious. Gather the right tools:
White vinegar
This go-to has everything you need. It’s natural, versatile and highly effective on glass shower enclosures.
Baking soda
It may surprise you! Mix it with water and spread the paste on the glass. Rub gently with a non-abrasive sponge and then rinse. That’s all there is to it!
Shaving cream
It’s not just for shaving! It can also protect your shower walls. Apply a light coat of shaving cream to the surfaces of your shower, then remove the excess with a cloth. This will create an invisible barrier against hard water.
Products with a base of citric acid or oxalic acid
These are recommended to eliminate soapy deposits and hard water stains.
Mould remover sprays
These are generally used for ceramic tiles and floors, grout, stainless steel, the shower interior and damp corners. They prevent fungus growth and mould.
Magic erasers
You read that right: they can be used to clean your shower door! Just be careful not to scratch or damage the glass.
EspaceProprio Tip Since lemon is acidic, it has natural cleaning properties. Do you have a lemon lingering in the refrigerator? Mix a few drops of lemon juice with water and pour the solution into a spray bottle. Spray over the surface of the glass and allow it to act. Scrub gently with a sponge or soft brush and then rinse.
Always follow the instructions given on any products you buy. And it’s especially important to test any new cleaner on a small area before using it everywhere. Check the results and make sure there’s no damage before you keep cleaning. Read the label if you encounter any problems. You’ll have everything you need to effectively freshen up your home.
Steps to clean your shower glass
Gather all the supplies you’ll need for a productive cleaning session. Once you have your equipment, you can get to work.
You’ll needgloves, a bucket, squeegee, empty spray bottle, soft brush, cloth, an effective cleaning product and maybe a descaling product. Here’s the recommended procedure:
1. Use the shower head to thoroughly rinse the entire surface of the shower to eliminate the first layer of dirt.
2. Use a home cleaning product, like a mixture of water and white vinegar, on the glass and shower walls. In a bucket, add 4 cups of hot water to 1 cup of vinegar. You can also add a few drops of dish soap for a really sparkling shower!
3. Pour the solution into a spray bottle. Then, you’re ready to apply the product.
4. Let it act for a few minutes.
5. Scrub gently with a soft, dry cloth. Use a circular movement, especially where there are lime deposits.
6. Rinse well, making sure to get rid of all soapy residue.
7. Use a squeegee to remove all remaining water drops.
8. Wipe the handles with a microfibre cloth to keep rust from forming.
9. Check the other shower walls and floor. If needed, use a brush and descaler or mould and mildew remover to get rid of lime and other stains.
Do our checklists make your life easier? Don’t hesitate to share them!
